Your shopping cart is empty!
Availability: In Stock
รายละเอียด
- สาเหตุที่พบบ่อยที่สุดสำหรับความไม่ถูกต้องของการวัดค่า pH คืออิเล็กโทรดที่ไม่สะอาดหรือทำความสะอาดไม่ถูกต้อง สิ่งนี้สำคัญมากที่ควรทราบเนื่องจากในระหว่างการสอบเทียบเครื่องมือจะถือว่าอิเล็กโทรดสะอาดและเส้นโค้งมาตรฐานที่สร้างขึ้นในระหว่างกระบวนการสอบเทียบจะยังคงเป็นข้อมูลอ้างอิงที่ถูกต้องจนกว่าจะทำการสอบเทียบครั้งต่อไป เครื่องวัดค่า pH ในตลาดปัจจุบันจะให้แรงดันไฟฟ้าชดเชยประมาณ± 60 mV ค่าเบี่ยงเบนจาก 0 mV ไม่ใช่เรื่องผิดปกติ แต่ควรมีค่าไม่เกิน± 30 mV กระบวนการสอบเทียบจะชดเชยการเปลี่ยนแปลงแรงดันออฟเซ็ต หากค่าชดเชย mV ยังคงเบี่ยงเบนไปและมิเตอร์ถูกปรับเทียบด้วยอิเล็กโทรดที่สกปรกการอ่านค่าที่ไม่ถูกต้องจะส่งผลให้การอ่านค่าผิด
- การทำความสะอาดเป็นกิจวัตรที่รวดเร็วและมีประสิทธิภาพซึ่งควรทำเป็นประจำเพื่อเป็นมาตรการป้องกันการใช้อิเล็กโทรดที่สกปรกและเพื่อให้แน่ใจว่าทางแยกไม่อุดตัน เพียงจุ่มอิเล็กโทรดลงในน้ำยาทำความสะอาด HI7061L เป็นเวลา 15 ถึง 20 นาทีจะละลายคราบแร่หรือสารเคลือบอื่น ๆ
คุณสมบัติ:
รายละเอียด
HI7061L HANNA General Purpose Cleaning Solution (500 mL)
Details
- The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
- Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Features:
Specifications
Application | General Purpose |
Package | bottles |
Size | 500 mL |
Quantity | 1 |
Certificate of Analysis | No |